That's weird. Your heating unit is on ... but your heater is blowing cold air. Truly problem, on a freezing winter season day in Calgary, Alberta
The good news is that there is help available for your furnace problem. Have a look at these 7 solutions for a heating system blowing cold air.
Incorrect Thermostat Setting:
You thought you set the thermostat to a comfy temperature level. Nevertheless, in some cases you're warm and other times you feel a definitely cold breeze coming out of the vents. Confirm the thermostat. It may be set to ON, which indicates that the fan will 24 hour furnace repair calgary run all the time, even when the heating system is cycling off.
SERVICE: Modification the setting to VEHICLE.
Other Thermostat Issues:
Your thermostat may be causing difficulty for other reasons. 1) If it is battery powered, the battery might have run down. OR 2) If you just set up a brand-new thermostat yourself, you might have bought a type that doesn't work with your system.
SERVICE: 1) Change the battery. OR 2) Seek advice from a HEATING AND COOLING expert to see whether the brand-new thermostat is, certainly, incompatible with your heating system.
Dirty Air Filter:
Is your heating system frequently shutting on and off? Your air filter may have become clogged up. When air flow to a gas heating system is limited due to an obstructed air filter, the security switch will eventually turn off the burners. Since no hot air is being produced, your fan will start blowing cold air.
SOLUTION: Modification the filter, if it's the disposable kind. Or, clean a long-term filter. (Find out how frequently to change your furnace filter.).
Obstructed Condensate Line:.
As a by-product of their function, high-efficiency furnaces produce condensed liquid. This condensate normally drains pipes harmlessly away. Occasionally, though, the condensate drain line congests, leading to a furnace blowing gas furnace cold air and dripping water.
SERVICE: Contact a heating and cooling professional to clean up the condensate line.
Pilot burner Is Out:.
Your pilot light may be out for one of two factors. Either it has merely burnt out, or it is not lighting properly in the first place. The latter problem might be due to obstruction from dirt and soot, or a malfunctioning thermocouple.
SOLUTION: You might wish to try relighting the pilot light yourself ... verrry thoroughly. If it won't light or it goes out within a minute or two, it's time to call a HEATING AND COOLING pro.
Inadequate Gas Supply:.
Certainly, a gas heater requires a sufficient supply of natural gas to work correctly. Was your gas supply turned off for any factor? Is your gas valve closed? If the answer to both questions is negative, an obstructed line could be hindering the flow of gas.
SERVICE: Find a furnace repair professional to check and fix the gas line.
Dripping Ducts:.
Older ductwork tends to develop cracks and leakages as an outcome of wear and tear. Even though the system is in fact blowing warm air, heat is dripping out before it ever reaches you, so you wind up feeling as if your heating system is blowing cold air.
SERVICE: Have an expert conduct duct sealing for you.
Stay Easily Warm This Winter Season.
Contact a local A/C professional to make sure that your home comfy 24/7 this winter.